Error 13

My roborock s50, something error 13, when i put in docking. Even the i already cleaned the charging contact.

It is become worse lately. How to fix it ? Tq

You can share this article on the community website!

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

  • If you have wiped charging contacts, could you send us pictures of charging contacts on dock and underneath of the robot.

    Please check if the dock charger is working or not.

    The indicator light on top of the dock should be solid on without the robot and off with the robot placed on it.


    Kindly double confirm if the cable and the slot of the dock are well connected.

    Please push the cable head into the slot at bottom of the dock very hard. See the video below.

  • Hi,

    check Youtube for error 13.

    Often it is a electronic overcurrent fuse to be replaced or if you are not familiar with a soldering iron replace the main board.

    Use RUILON SMD2920P185TF SMD2920 1.85A PTC Resettable Fuse

    as replacement.

    For me that was the fix!

    Kind regards from Germany


Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Welcome to Roborock Forum