Charging problem Roborock S5??

Charging problem Roborock S5??

Hi, I have recently come across this problem when charging my Roborock S5.

It starts to charge correctly but after a short period (30 seconds - 3 minutes) it resposition itself by backning out and into the charging station and continues to charge. This repeates a couple of times until it gives an Error 13.

You can share this article on the community website!

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

  • Hi, thanks for reaching out.

    1. If there're some stains or rust on the charging contacts on the dock or underneath of the robot, please use a piece of cloth moistened with alcohol solution or an eraser to remove them. See attached picture "charging contact".

    2. If you have wiped charging contacts, could you send us pictures to show them?

    3. Please check if the dock charger is working or not.

    The indicator light on top of the dock should be solid on without the robot and off with the robot placed on it. See attached picture.

    Kindly double confirm if the cable and the slot of the dock are well connected.

    Please push the cable head into the slot at bottom of the dock very hard. See the video below.

    4. Please unplug the charging dock, and leave it there for about 2 minutes. Then please re-plug it and try again.


Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Welcome to Roborock Forum