Went offline one night:
turned off and back on
Went through the procedures to reconnect online -- app sees the roborock wifi but says no internet.
Tried this many more times
Reset the S7
still would not connect
cleared app cache
deleted and reinstalled the app
still would not connect
Have done this over the last 3 days thinking maybe the problem was the online syncing
Took this to a new 2.5 wifi and tried to connect still the same (wanted to eliminate local wifi issue)
Don't know what to do next. I have read the many other offline issues on the support but none of them solved my issue.
Thanks,
Daniel
Firmware: 02.13.98
attached is a
picture of roborock numbers
https://drive.google.com/file/d/1sCEUxJtSdB48oSC5AagNiCBRKdR3-GI1/view?usp=sharing
Hello,
Thank you for taking the time to reach out to Customer Support and we are sorry to hear about the trouble you are having with your device.
In this case, we suggest you try the following:
1. Please reboot the robot first.
Note: Move the robot off the dock, press the power button for 3-5 seconds to turn it off/on manually.
2. Please then delete the offline device and reconnect it.
1) Press and hold the offline device on the app and then remove/delete it.
2) After that, please reconnect it to the home wifi.
If that still doesn't work, please try a hard reset on the robot.
Step 1. Hold the recharge button for 3-5 seconds.
Step 2. Press the reset button next to wifi LED with a pin just once. Then the light of the power button and the recharge button will be out. When doing this, please make sure you're still holding the recharge button without moving.
Step 3. Keep holding the recharge button for 5 seconds after you've pressed the reset button until the light of the power button blinks again, then you'll hear the tone "Restoring the initial version. It will take about five minutes. Please wait with patience". After that, you could stop holding the recharge button.
If none of those solves the issue, please download another app called Mihome to try the connection one more time.
Best regards.
Hi I have same issue and did follow the instructions as above but it still would not connect. Help pls.
Hi, thanks for your reply. In this case, we suggest you try a factory reset on the robot to have a try:
The instructions are as follows:
Step 1. Hold the recharge button for 3-5 seconds.
Step 2. Press the reset button next to wifi LED with a pin just once. Then the light of the power button and the recharge button will be out. When doing this, please make sure you're still holding the recharge button without moving.
Step 3. Keep holding the recharge button for 5 seconds after you've pressed the reset button until the light of the power button blinks again, then you'll hear the tone "Restoring the initial version. It will take about five minutes. Please wait with patience". After that, you could stop holding the recharge button.