Modifying the map (adding a room)

Modifying the map (adding a room)

Is there an easier way to add a room to the map that was not originally scanned (due to a door being shut) other than having the vacuum run through the entire house again and remapping the whole house?

You can share this article on the community website!

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

  • Hello,

    Thanks for reaching out.


    Set room cleaning or zone cleaning with this specific room included and verify whether the map will update it automatically.

    Otherwise, I'm afraid that you need reset the current map and re-map the house.

    When robot is creating the first map,

    1. Map saved mode is enabled.

    2. Robot starts from dock;

    3. Robot goes everywhere on map it detects to clean, not just somewhere. Pls make sure the doors are open for the rooms you want to be displayed on map.

    4. Robot returns to dock(whose position is not moved) by itself and successfully.

    Like0
    wrkeener
    wrkeener03/05/2021      23:00
    @RR_Support:

    To map (add) a new room without remapping the whole house, follow these steps:

    1. Have robot spot clean using "Pin N Go" an area inside the room or at least at the door. Send robot back to dock once done. The new room will show as a grey area.
    2. Set a zone clean than encompasses entire room plus additional few extra feet on at least two sides. Let robot finish and return to dock.
    3. Choose edit map and then "Edit Room". At the top right select "Re-Split Rooms". The new room should be added and all room can be divided and named.
    Like1
    RR_Support
    RR_SupportStaff Member03/06/2021      04:39
    @wrkeener:

    Sounds like a good idea!

    Like0

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Drands
Welcome to Roborock Forum